|
Labcaire launches revolution in endoscope cleaning and processing
 Labcaire has unveiled an all new Automated Endoscope Reprocessor (AER) that radically redraws the performance and usability boundaries for this type of instrument. Autoscope Isis halves the processing time compared to conventional AERs, with a total cycle time of just 20 minutes.
The Autoscope Isis range of AERs is compatible with a wide choice of Labcaire approved disinfectants and detergents, including single-shot varieties. Despite a small footprint of less than one square metre, Autoscope Isis will clean and reprocess either one or two endoscopes simultaneously with each endoscope mounted independently on its own load carrier.
The revolutionary design was driven by the strict requirements of HTM 2030 and prEN ISO 15883 (part 4). Developed as a pass-through design, which will be especially useful in many new build projects where the concept is being adopted increasingly, Autoscope Isis may also be specified as a stand alone system.
For pass-through installations, the unit is sealed into the wall. All maintenance and servicing of Autoscope Isis can be performed via the access panels on the loading side. This eliminates the need to remove the pass-through units from the wall at each service visit and potentially upsetting the balance between clean and dirty rooms.
For more information
If you would like to find out more:
Tel: 01275 793000
Email:
This e-mail address is being protected from spam bots, you need JavaScript enabled to view it
Web: www.labcaire.co.uk
|
